China Factory Supply chemisches flüssiges Oxyheterocyclopentan

Basisinformation

Modell Nr.	Oxyheterocyclopentan
Verwendung	Analytische Reagenzien
Quelle	Importierte Reagenzien
Gewohnheitsbezeichnung	Feinchemikalien
Anwendung	Industrie
Eigentum	Organisches Reagenz
Transportpaket	Flasche/Eimer
Spezifikation	25 kg/Eimer, 250 ml/Flasche
Warenzeichen	Yedun
Herkunft	China
Produktionskapazität	100 Tonnen/Jahr

Produktbeschreibung

Dichte:	0,89 g/cm3
Schmelzpunkt:	-108,5 °C
Siedepunkt:	66 °C
Flammpunkt:	-14 °C (CC)
Brechungsindex:	1,465 (20 °C)
Gesättigter Dampfdruck:	19,3 kPa (20 °C)
Kritische Temperatur:	268 °C
Kritischer Druck:	5,19 MPa
Zündungstemperatur:	321 °C
Obere Explosionsgrenze (v/v):	11,8 %
Untere Explosionsgrenze (v/v):	1,8 %
Aussehen:	farblose Flüssigkeit
Löslichkeit:	Löslich in den meisten organischen Lösungsmitteln wie Wasser, Ethanol, Ether, Benzol usw

Handhabung und Lagerung
Precautions for operation: closed operation, full ventilation. Operators must receive special training and strictly abide by the operating procedures. It is recommended that operators wear filter gas masks (half masks), safety glasses, anti-static work clothes and rubber oil resistant gloves. Keep away from kindling and heat sources. Smoking is strictly prohibited in the workplace. Use explosion-proof ventilation system and equipment. Prevent steam from leaking into the air of the workplace. Avoid contact with oxidants, acids and bases. During filling, the flow rate should be controlled and there should be a grounding device to prevent the accumulation of static electricity. Handle with care to prevent package and container damage. Equip with corresponding varieties and quantities of fire-fighting equipment and leakage emergency treatment equipment. Emptied containers may leave harmful substances.Storage precautions: polymerization inhibitor is usually added to commodities. Store in a cool and ventilated warehouse. Keep away from kindling and heat sources. The storage temperature should not exceed 30 ºC. The package shall be sealed and shall not be in contact with air. It should be stored separately from oxidants, acids, alkalis, etc., and should not be mixed. Explosion proof lighting and ventilation facilities are adopted. It is forbidden to use mechanical equipment and tools that are easy to produce sparks. The storage area shall be equipped with leakage emergency treatment equipment and suitable storage materials.